Full Product Manual

OWNER'S MANUAL

TYTUS FRESNO SERIES

A) ldentify which panel ts onto the left (“L”) or right (“R”) side of the two side carts.

B) Line up the bottom of the panel with the bolts on the side cart at a 45° angle.

C) Rotate the panel forward onto the top bolts, then let it drop down into place.

TIP: Have a partner hold the side cart steady while installing the side panels.

TIP: Make sure that the side panel is securely fastened. The panel should not

pull away from the side cart at the top or bottom.

STEP 6: INSTALL THE SIDE PANELS

D) Repeat steps 6A through 6C to install the panel on the other side cart.

NOTE: With the side panels and top caps

removed from your carts, you can access the rear

of the left and right kick plates to remove the two

wingnuts securing the panels on either side. Pull

the left and right kick plates o the carts.