Full Product Manual

28
TM
lf the grill doesn't light in ve seconds, turn the burner control o, wait ve minutes, and repeat the lighting procedure.
lf the grill still does not light:
A) Turn the burner control and gas source OFF, and wait ve minutes for the gas to clear.
B) Conduct a leak test of ALL gas connections and gas sources. See "Checking for Gas Leaks" (PAGE 32) for
instructions. lf no leaks are detected, wait ve minutes for any gas to clear and repeat the lighting procedure.
NOTE: You may have to push and turn the
control knob up to three or four times to light.
5. Push and turn the control knob to Hl. The built-in ignitor lights the burner automatically.