Product Manual

Lexis Light – ET1B User’s Manual T. Rev. 0512 PM 17
8. GENERAL MAINTENANCE AND INSPECTIONS
Minimum maintenance should prevent unnecessary repairs.
Keep Your Easy Fold Deluxe Shining
Wipe the seat clean with a damp cloth. Protect the painted parts with a coat
of auto wax.
WARNING: Water or excessive moisture around the controller unit or
electrical connections may cause contamination of electrical circuitry, damage
and malfunction as well as personal injury. Do not leave your Lexis Light
in the rain or in excessively humid locations.
Daily Checks
With the Lexis Light switched off, check that the hand control lever
mechanism returns to the rest position when you push and release. If there is
a problem do not use the Lexis Light and contact your authorized
dealer.
Weekly Checks
1. Throttle test: Pull the throttle to the full speed position and switch ON the
Power switch. The Lexis Light should not move and the LED on
the panel should flash. If the Lexis Light does move – do not use
your Lexis Light. Contact your authorized dealer.
2. Automatic brake and drive test: This test should be carried out on a
level surface with at least 3’ / 1 m. clear space around the Lexis Light
 Switch the Lexis Light on.
 Move the control lever only slightly in the forward direction until you hear
a “click” when the brake disengages. The Lexis Light should start
to move forward slowly.
 Immediately release the throttle. You must be able to hear a “click” when
the brake engages back, within a few seconds.
 Repeat the test in the reverse direction.
If you do not hear the brake operating, or the Lexis Light does not
move slowly in the expected direction – do not use your Lexis Light.
Contact your authorized dealer.