USER GUIDE STEREO WIRELESS HEADSET MODEL: 22BF08 THANK YOU FOR CHOOSING TZS BACKGROUND NOISE REDUCTION FOR CALLS
In the Box 3.
Overview Boom microphone Play/Pause Answer calls /End calls Next track Previous track Mute microphone switch Indicator Type C charging port 03
How to Wear 1. The boom microphone can move to accommodate a user’s preference for right side or left side wear. 2. Position the microphone to your preference.
Operation Power On Press and hold the for 3 seconds Power Off Press and hold the for 3 seconds 05
Volume +/- Click the + button to increase the volume, click the - button to decrease the volume. Previous/Next song Press and hold the + button to skip to the next song, press and hold the - button to skip to the previous song.
Connecting 1. How to connect with the Bluetooth device. Bluetooth ON Bluetooth Devices TZS TP-BF03 Paired Now discoverable Press and hold the button 3S 'power on' head, the pairing LED will be flash, and 'pairing' will be heard The LED will flash blue to indicate the headphone is connected, and 'connected' is heard. 07 Activate "Bluetooth" in your device‘s settings and select ”TZS TP-BF03.
2. How to connect with two Bluetooth devices. Bluetooth Bluetooth ON Bluetooth TZS TP-BF03 Devices TZS TP-BF03 Paired Now discoverable Device 1 Device 2 When you first device connected successfully, switch the first device Bluetooth off, activate your second device Bluetooth,connect the headphone, and then activate the first device Bluetooth, the headphone will be reconnected the first device, and then the headphone connected the 2 devices successfully.
Calls with a Smartphone Calls with a Smartphone 10m Press 1 × Answer Press 1 × End Call Press and hold 2 seconds Decline Siri/Cortana/Assistance Press and hold 2 seconds then release 09
Charging the Headset During charging the red LED will light. When fully charged, the LED will turn off. The headset will be off during the charging. Plug the USB-C charging cable into a computer’s USB port. Plug the USB-C charging cable into a USB wall charger.
Other Operations Muting the Boom Mic: Switch the mute button to the off Clearing the pairing: Press and hold the seconds while the headset is off 11 for 10
Product Specifications Bluetooth version: Bluetooth V5.0 Bluetooth Profile: A2DPv1.3.1; AVRCPv1.6; HFPv1.7; HSPv1.2; SPP v1.2; DID v1.3; HID v1.1; PXP v1.0.1; FMP v1.0; BAS v1.0 Working Frequency: 2.402GHz-2.
WARNING Headsets can deliver sounds at loud volumes and high-pitched tones. Avoid prolonged use of the headset at excessive sound pressure levels. Please read the safety guidelines below prior to using this headset. Safety information Use of a headset will impair your ability to hear other sounds. Use caution while using your headset when you are engaging in any activity that requires your full attention.
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A product with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Battery warning! CAUTION – The battery used in this product may present a risk of fire or chemical burn if mistreated. Do not attempt to open the product or replace the battery. This will void the warranty.
Troubleshooting & Support Headphones will not power on: • Be sure the headphones are fully charged. • Remove “TZS TP-BF03” from your phone’s Bluetooth device list and try again. • If the model still does not appear, restart the headset and phone, then try again. After successfully pairing, the headphones disconnect • Be sure the battery has adequate power and recharge. • Headphones must be within 10m of most mobile devices.
There is no sound when listening to music • Increase the volume on your headphones or the mobile device. • Reestablish the Bluetooth wireless connection between the headphones and your mobile device. • Check if the audio app has paused or stopped playback. Headphones will not charge • Confirm that the charging cable is operational or undamaged. • Ensure that the USB charging cable is fully seated in the headphones and wall charger ports. • Confirm that the USB port is outputting power.
FCC Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.