User's Manual Part 2

11.2: GAP Commands Chapter 11: AT Commands Reference
27
store_in_startup_database enumerator 0: The setting will only be valid for the current
power cycle.
1: The Serial Port Adapter will remember the
setting between power cycles. The settings
database in the Serial Port Adapter will be
updated.
Responses Description
<CR><LF>OK<CR><LF> Successful response.
<CR><LF>ERROR<CR><LF> Error response.
Read_Pairing_Mode (AT*AGPM?)
AT Command Description
AT*AGPM?<CR> Reads the pairing mode.
Responses Description
<CR><LF>*AGPM:<pairing_mode><CR><LF>OK<CR><LF> Successful response.
<CR><LF>ERROR<CR><LF> Error response.
Result Pa-
rameters
Type Value
pairing_mode enumerator 1: GAP non-pairing mode
2: GAP pairing mode (default value)
Write_Pairing_Mode (AT*AGPM=)
AT Command Description
AT*AGPM=<pairing_mode>,<store_in_startup_database><CR> Writes the GAP pairing
mode.
Command Pa-
rameters
Type Value
pairing_mode enumerator 1: GAP non-pairable mode.
2: GAP pairable mode (default value).
store_in_startup_database enumerator 0: The setting will only be valid for the current
power cycle.
1: The Serial Port Adapter will remember the
setting between power cycles. The settings
database in the Serial Port Adapter will be
updated.
Responses Description
<CR><LF>OK<CR><LF> Successful response.
<CR><LF>ERROR<CR><LF> Error response.