User's Manual Part 2

11.2: GAP Commands Chapter 11: AT Commands Reference

<CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

Read_Bonded_Devices (AT*AGBD?)

AT Command Description

AT*AGBD?<CR> Read the bonded devices.

Responses Description

<CR><LF>*AGBD:<no_of_devices><CR><LF>OK<CR><LF> Successful response

*AGBDE:<bd_addr>,<device_name_valid>,<device_name>

This response is sent for

every found device.

<CR><LF>ERROR<CR><LF> Error message.

Response

Parameters

Type Value

no_of_bonded_devices integer Number of bonded devices.

bd_addr Bd_Addr Bluetooth device address of the device from which

to retrieve the name.

device_name_valid enumerator 0: device_Name parameter valid.

1: Device is bonded but its name is not available.

Device_Name is parameter invalid.

device_name string Name of discovered device. Null terminated ASCII

represented string.

Model Constraint

cB-OEMSPA311

cB-OEMSPA331

cB-OEMSPA312

cB-OEMSPA332

The command will always return an empty string as device name

with the device_name_valid parameter always set to 1.

Read_Fixed_PIN (AT*AGFP?)

AT Command Description

AT*AGFP?<CR> Read the fixed PIN code used by the Serial Port

Adapter during bond and pairing.

Responses Description

<CR><LF>*AGFP:<pin_code><CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

Response

Parameters

Type Value