User's Manual Part 2

11.2: GAP Commands Chapter 11: AT Commands Reference

pin_code string The PIN code is a string of one to sixteen al-

phanumerical characters.

It is recommended to use a pin code of at least

eight characters of mixed type, e.g. “12w35tg7”.

The default value is “0”.

Write_Fixed_PIN (AT*AGFP=)

AT Command Description

AT*AGFP=<pin_code>,

<store_in_startup_database><CR>

Writes the fixed PIN code used by the Serial Port

Adapter during bond.

Command

Parameters

Type Value

pin_code string The PIN code is a string of one to sixteen alpha-

numerical characters.

It is recommended to use a pin code of at least

eight characters of mixed type, e.g. “12w35tg7”.

The default value is “0”.

store_in_startup_database enumerator 0: The setting will only be valid for the current

power cycle.

1: The Serial Port Adapter will remember the

setting between power cycles. The settings

database in the Serial Port Adapter will be up-

dated.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

Read_Local_Name (AT*AGLN?)

AT Command Description

AT*AGLN?<CR> Reads the local Bluetooth device name.

Responses Description

<CR><LF>*AGLN:<device_name><CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

Response

Parameters

Type Value

device_name string Max 240 characters.

The default name is “Bluetooth Device”.

Write_Local_Name (AT*AGLN=)

AT Command Description

AT*AGLN=<device_name>, <store_in_startup_database><CR> Wri

tes

oca

l Bl

uetoot