User's Manual Part 2

11.6: Miscellaneous Commands Chapter 11: AT Commands Reference
55
Responses Description
<CR><LF>OK<CR><LF> Successful response
<CR><LF>ERROR<CR><LF> Error message.
Model Constraint
cB-OEMSPA311
cB-OEMSPA331
cB-OEMSPA312
cB-OEMSPA332
Not supported.
Read_Allow_Configuration_Over_Bluetooth
(AT*ACCB?)
AT Command Description
AT*ACCB?<CR> Determine whether or not configuration over Bluetooth
is allowed. Configuration can either be performed
using AT commands or using the ECI protocol.
Responses Description
<CR><LF>*ACCB:<allow_configuration_over_bluetooth>
<CR><LF>OK<CR><LF>
Successful response
<CR><LF>ERROR<CR><LF> Error message.
Response Parame-
ters
Type Value
allow_configuration_over_bluetooth enumerator 0: Configuration over Bluetooth is not
allowed (default value).
1: Configuration over Bluetooth is
allowed.
Write_Allow_Configuration_Over_Bluetooth
(AT*ACCB=)
AT Command Description
AT*ACCB= <al-
low_configuration_over_bluetooth>,
<store_in_startup_database><CR>
See the
Read_Allow_Configuration_Over_Bluetooth
command.
Command Parame-
ters
Type Value
allow_configuration_over_Bluetooth enumerator See the
Read_Allow_Configuration_Over_Blu
etooth command.