User's Manual Part 2

11.6: Miscellaneous Commands Chapter 11: AT Commands Reference

store_in_startup_database enumerator 0: The setting will only be valid for the current

power cycle.

1: The Serial Port Adapter will remember the

setting between power cycles. The settings

database in the Serial Port Adapter will be

updated.

Responses Description

<CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

Model Constraint

cB-OEMSPA311

cB-OEMSPA331

cB-OEMSPA312

cB-OEMSPA332

Online 32 MHz mode (4) is not supported.

Stop mode cannot be configured if the DSR mode is 2 (see

AT*AMDS).

Read_Max_Output_Power (AT*AMMP?)

AT Command Description

AT*AMMP?<CR> Read the maximum output power used by the Serial

Port Adapter when communicating. Note that not all

Serial Port Adapter models support output power

control.

Responses Description

Successful response

<CR><LF>ERROR<CR><LF> Error message.

Response Parame-

ters

Type Value

max_output_power integer 255: Use the highest output power

supported by the Serial Port Adapter as

the maximum output power (default).

128-m: -m dBm (m<30)

128: 0 dBm

128+n: n dBm (n<30)