User's Manual Part 2

11.6: Miscellaneous Commands Chapter 11: AT Commands Reference

Responses Description

<CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

Model Constraint

cB-OEMSPA13

cB-OEMSPA33

Not supported.

Read_Link_Policy (AT*AMLP?)

AT Command Description

AT*AMLP?<CR> Read current Link Policy.

Responses Description

<CR><LF>*AMLP: <link_policy>, <parame-

ter><CR><LF>OK<CR><LF>

Successful response

<CR><LF>ERROR<CR><LF> Error message.

Response Parame-

ters

Type Value

link_policy integer See Write_Link_Policy command.

parameter integer See Write_Link_Policy command.

Model Constraint

cB-OEMSPA13

cB-OEMSPA33

Not supported.

Write_Link_Policy (AT*AMLP=)

AT Command Description

AT*AMLP=<link_policy>, <parameter>,

<store_in_startup_database><CR>

Write link policy.

The link policy can be chosen to optimize the

link for a specific application. The link policy can

be chosen to reduce power consumption, get

faster response times or to optimize the SPA as

either sender or receiver.

Note!

Using other link policies than the default

may lead to interoperability problems. Verify

that the chosen link policy works with other

devices your application is intended to inter-

operate with. If not, use the default link pol-

icy.

Link policy 3 or 4 gives the shortest response

times.

Link policy 8 combined with stop mode (AMPM:

3) gives the lowest power consumption.