User's Manual

Version 1.0 - 2006-08 24
5.1.2 Mounting Holes
There are 2 x 2.3mm mounting holes on cB-0905. The reasons for the 2.3mm holes are that the
threaded M2 holes on the single and double row connectors (see section 5.2.1) are not aligned.
The outer tangents of the 2.3mm holes align the module if the single row connectors are used
and the inner if double row connectors are used (see Figure 5).
Choose the outer tangent (CC distance 27.24mm) if the module is aligned and mounted with
some other technique based on M2 screws (e.g. press-fit nuts), see Figure 6 and Figure 7.
Figure 5: The 2.3mm mounting holes [mm]