User's Manual Part 2

6-4 Caring for the Tablet Computer
Problem Solution
I cannot connect to
another wireless LAN
device.
Make sure that wireless LAN feature is turned
on.
Make sure that the SSID setting is the same for
every wireless LAN device in the network.
Restart the Tablet Computer.
Make sure the IP address or subnet mask
setting is correct.
I cannot connect to
another device with
Bluetooth.
Make sure that both devices have Bluetooth
turned on.
Make sure that the distance between the two
devices is within 10 meters and there are no
walls or large obstructions between the devices.
Make sure that both devices are turned on and
are congured to be discoverable.
Make sure that both devices are compatible.
No sound is produced.
Adjust the volume of the Tablet Computer (see
“Adjusting Volume” on page 2-11).
If using an external audio device, make sure that
the cable is properly connected.
The Tablet Computer
fails to start up.
Perform these steps in the following order:
a. Remove the batteries.
b. Disconnect the external power source.
c. Re-install the batteries.
d. Connect the external power source.
e. Try to restart again.