User's Manual

TOBY-R2 series - System Integration Manual
UBX-16010572 - R04 Approvals
Page 130 of 147
4.2 US Federal Communications Commission notice
United States Federal Communications Commission (FCC) IDs:
 u-blox TOBY-R200 cellular modules: XPY1EHM44NN
 u-blox TOBY-R202 cellular modules: XPY1EHQ24NN
4.2.1 Safety warnings review the structure
 Equipment for building-in. The requirements for fire enclosure must be evaluated in the end product
 The clearance and creepage current distances required by the end product must be withheld when the
module is installed
 The cooling of the end product shall not negatively be influenced by the installation of the module
 Excessive sound pressure from earphones and headphones can cause hearing loss
 No natural rubbers, hygroscopic materials, or materials containing asbestos are employed
4.2.2 Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
 this device may not cause harmful interference
 this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure Information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter except as authorized
in the certification of the product.
The gain of the system antenna(s) used for the TOBY-R2 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the value
specified in the FCC Grant for mobile and fixed or mobile operating configurations:
o TOBY-R202 modules:
o 9.7 dBi in 700 MHz, i.e. LTE FDD-12 band
o 10.0 dBi in 850 MHz, i.e. UMTS FDD-5 or LTE FDD-5 band
o 7.9 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 8.5 dBi in 1900 MHz, i.e. UMTS FDD-2 or LTE FDD-2 band
o TOBY-R200 modules:
o 9.8 dBi in 700 MHz, i.e. LTE FDD-12 band
o 10.0 dBi in 850 MHz, i.e. UMTS FDD-5 or LTE FDD-5 band
o 7.8 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 8.3 dBi in 1900 MHz, i.e. UMTS FDD-2 or LTE FDD-2 band
o 4.0 dBi in 850 MHz, i.e. GSM 850
o 2.2 dBi in 1900 MHz, i.e. GSM 1900