Integration Manual

SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R11 Approvals Page 128 of 157
Verizon
LTE Cat M1 Band
13
LTE Cat M1 Bands
4, 13
AT&T
LTE Cat M1 Bands
2, 4, 5, 12
LTE Cat M1 Bands
2, 4, 5, 12
LTE Cat M1 Bands
2, 4, 5, 12
LTE Cat M1 Bands
2, 4, 5, 12
T-Mobile
LTE Cat NB1 Bands
2, 4, 5, 12
Bell
LTE Cat M1 Bands
2, 4, 5, 12
Telus
LTE Cat M1 Bands
2, 4, 5, 12
LTE Cat M1 Bands
2, 4, 5, 12
Telstra
LTE Cat M1 Bands
3, 5, 8, 28
Table 38: Summary of certification approvals achieved for the SARA-R4/N4 series modules, with related RAT and bands
☞ For the complete list and specific details regarding the certification approvals available for all the
different SARA-R4/N4 series modules’ ordering numbers, including certificates of compliancy, please
contact the u-blox office or sales representative nearest you.
The manufacturer of the end-device that integrates a SARA-R4/N4 series module must take care of all
certification approvals required by the specific integrating device to be deployed in the market.
The required certification scheme approvals and relative testing specifications applicable to the end-device
that integrates a SARA-R4/N4 series module differ depending on the country or the region where the
integrating device is intended to be deployed, on the relative vertical market of the device, on type, features
and functionalities of the whole application device, and on the network operators where the device is
intended to operate.
The SARA-R4/N4 series modules from “02” product versions onwards include the capability to configure
the device by selecting the operating Mobile Network Operator Profile, Radio Access Technology, and
bands. In the SARA-R4/N4 series AT Commands Manual [2], see the +UMNOPROF, +URAT, and
+UBANDMASK AT commands.
As these configuration decisions are made, u-blox reminds manufacturers of the end-device integrating the
“02” product versions onwards of SARA-R4/N4 series modules to take care of compliance with all the
certification approvals requirements applicable to the specific integrating device to be deployed in the
market.
☞ Check the appropriate applicability of the SARA-R4/N4 series module’s approvals while starting the
certification process of the device integrating the module: the re-use of the u-blox cellular module’s
approval can significantly reduce the cost and time to market of the application device certification.
☞ The certification of the application device that integrates a SARA-R4/N4 series module and the
compliance of the application device with all the applicable certification schemes, directives and
standards are the sole responsibility of the application device manufacturer.
SARA-R4/N4 series modules are certified according to all capabilities and options stated in the Protocol
Implementation Conformance Statement document (PICS) of the module. The PICS, according to the 3GPP