Integration Manual

LISA-U series - System Integration Manual
3G.G2-HW-10002-A3 Preliminary System description
Page 102 of 160
Manufacturers of mobile or fixed devices incorporating the LISA-U series modules are
authorized to use the FCC Grants and Industry Canada Certificates of the LISA-U series
modules for their own final products according to the conditions referenced in the certificates.
The FCC Label shall in the above case be visible from the outside, or the host device shall bear
a second label stating:
LISA-U100: "Contains FCC ID: XPYLISAU120" resp.
LISA-U120: "Contains FCC ID: XPYLISAU120" resp.
LISA-U200: "Contains FCC ID: XPYLISAU200" resp.
LISA-U230: "Contains FCC ID: XPYLISAU230" resp.
The IC Label shall in the above case be visible from the outside, or the host device shall bear a
second label stating:
LISA-U100: "Contains IC: 8595A-LISAU120" resp.
LISA-U120: "Contains IC: 8595A-LISAU120" resp.
LISA-U200: "Contains IC: 8595A-LISAU200" resp.
LISA-U230: "Contains IC: 8595A-LISAU230" resp.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions:
o this device may not cause interference
o this device must accept any interference, including interference that may cause undesired
operation of the device
Radio Frequency (RF) Exposure Information
The radiated output power of the u-blox Wireless Module is below the Industry Canada (IC)
radio frequency exposure limits. The u-blox Wireless Module should be used in such a manner
such that the potential for human contact during normal operation is minimized.
This device has been evaluated and shown compliant with the IC RF Exposure limits under
mobile exposure conditions (antennas are greater than 20cm from a person's body).
This device has been certified for use in Canada. Status of the listing in the Industry Canada’s
REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web
address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
IMPORTANT: Manufacturers of portable applications incorporating the LISA-U series modules
are required to have their final product certified and apply for their own FCC Grant and
Industry Canada Certificate related to the specific portable device. This is mandatory to meet
the SAR requirements for portable devices.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Canada, avis d'Industrie Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes:
o cet appareil ne doit pas causer d'interférence
o cet appareil doit accepter toute interférence, notamment les interférences qui peuvent
affecter son fonctionnement
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil u-blox Wireless Module est inférieure à
la limite d'exposition aux fréquences radio d'Industrie Canada (IC). Utilisez l’appareil de sans
fil u-blox Wireless Module de façon à minimiser les contacts humains lors du fonctionnement
normal.