Installation guide

10 u-line.com
Anti-Tip Bracket Installation
CAUTION
!
The anti-tip bracket must be installed to prevent the unit
from tipping when doors are fully opened, or excess weight
is placed on the front of the unit.
The anti-tip bracket has multiple mounting choices, depending on
your particular cabinet arrangement. Using the following instructions,
secure the anti-tip plate to the unit and then to your cabinets. Find
the anti-tip bracket kit included inside your unit.
3018CLR Top Mount
Top mount configurations work well with fully secured wood or
laminate countertops.
1. Align the bracket on top of your unit as shown above.
2. Align the anti-tip plate with the holes provided on the unit. Using
the 2 supplied black #8 x 1/2" screws, install screws through the
plate into the unit using a #2 Phillips head screwdriver.
3. Completely slide the unit into its position in the opening. Be
certain unit height is properly adjusted. (See LEVEL & INSTALL.)
4. Open the door completely. Make certain the door clears the
surrounding cabinetry.
5. Using the anti-tip bracket as a template, use a 3/32" drill bit to drill
pilot holes, 5/8" deep into bottom of countertop.
Attach to the cabinet using the 2 supplied screws after leveling.
3018CLR Side Mount
Side mount configurations work well if you have a granite countertop
or do not wish to mount the bracket to the underside of your
countertop.
1. Align the bracket to the hinge side of your unit as shown above.
2. Align the anti-tip plate with the holes provided on the unit. Using
the 2 supplied black #8 x 1/2" screws, install screws through the
plate into the unit using a #2 Phillips head screwdriver.
3. Completely slide the unit into its position in the opening. Be
certain unit height is properly adjusted. (See LEVEL & INSTALL.)
4. Open the door completely. Make certain the door clears the
surrounding cabinetry.
5. Using the anti-tip bracket as a template, use a 3/32" drill bit to drill
pilot holes, 5/8" deep into cabinetry frame.
Attach to the cabinet using the 2 supplied screws after leveling.
8 3000 Series Anti-Tip Bracket
Left View Of Cabinet
Right View Of Cabinet