user guide_and_manual

USER GUIDE
Control Operation - Service 3
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
To access All Errors follow the steps below.
1. Press to select “All Errors”.
2. Press .
3. Press and to scroll through available
information.
To clear the error log press to select “Clear Errors” and
press to confirm.
To exit the Actual Temps menu press to select “Return
to Menu” and press to confirm.
Relay Status
Relay status displays the current state of each relay. While
all available relays are displayed, only a portion are used.
NOTE: The Cond (Condenser Fan) will switch state with
the compressor relay, however the condenser fan is
actually powered through a DC output. Condenser fan
status can be viewed through the “Output” service menu
option.
To access Relay Status
1. Use to select “Relay Status”.
2. Press .
3. Press and to scroll through available
information.
To exit the Relay Status simply press to exit.
ID Description Availability
Mull Mullion Heater Not Used
Pump Circulation Pump Used
Wate Water Valve Used
Harv Harvest Used
Cond Condenser Fan Used
Comp Compressor Used
Up
Select
Down
RETURN TO MENU
RELAY STATUS
MULL COND DEF LVLV
OFF OFF OFF OFF
63