User Manual

USER GUIDE

Door Latch 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Door Latch

The door latch assembly included with your unit can be

installed to prevent the door from opening when the

vehicle is in motion.

To install, perform the following:

1. Remove the two outer most screws from the non-hinge

side.

2. Place spacer (2) over mounting holes. Place latch (1)

on top of spacer (2). NOTE: Spacer (2) only required if

included with unit.

3. Re-install the screws, but do not tighten all the way.

4. Verify door latch engagement and adjust as necessary.

5. Tighten screws.

Door latch can be used to prop door open approximately

1/2" (13 mm) when unit is not in use.