User's Manual

16 u-line.com
Condenser Cleaning
Interval - As Needed
To maintain operational efficiency, keep the front grille free of dust
and lint, and clean the condenser when necessary. Depending on
environmental conditions, more or less frequent cleaning may be
necessary.
WARNING
!
Disconnect electric current to the unit before cleaning
the condenser.
NOTICE
DO NOT use any type of cleaner on the condenser unit.
Condenser may be cleaned using a vacuum, soft brush or
compressed air.
Storage, Holiday and Moving
If not using the unit for an extended period, or otherwise stored,
follow these steps completely:
WARNING
!
Electrical Shock Hazard. Disconnect electric current
before servicing. Before operating, replace all panels.
Failure to do so may result in electrical shock or death.
NOTICE
If the ambient temperature is expected to drop below 50 °F
(10 °F), switch off and unplug unit.
1. Remove all consumable contents from the unit.
2. Disconnect the electrical cord from its socket, and leave it
disconnected until the unit is returned to service.
3. Clean and dry the interior of the furniture cabinet.
4. During periods of non-use, the cabinet must remain open to
prevent formation of mold and mildew. Open door a minimum of
50 mm to provide the necessary ventilation.
Product Disposal
DANGER
!
RISK OF CHILD ENTRAPMENT. Before you throw away your
old refrigerator or freezer, take off the doors and leave shelves
in place so children may not easily climb inside.
If the unit is being removed from service for disposal, check and obey
all Federal, State and Local regulations regarding the disposal and
recycling of refrigeration appliances, and follow these steps
completely:
1. Remove all consumable contents from the unit.
2. Disconnect electric current to the unit’s power receptacle. Unplug
the electrical cord from its socket.
3. Remove the cabinet door.