User guide

USER GUIDE

Grille - Plinth Installation 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Grille - Plinth Installation

REMOVING AND INSTALLING GRILLE

WARNING

Disconnect electric power to the unit before

removing the grille.

WARNING

DO NOT touch the condenser fins (4). The

condenser fins are SHARP and can be easily

damaged.

Removing the grille

1. Disconnect power to the unit.

2. Loosen the two screws (1).

3. Remove grille (2) and grille cap (3) from unit.

Installing the grille

1. Make sure grille cap (3) is behind grille in slots (2)

provided in grille before attaching grille to unit.

2. Align cabinet and grille holes and secure, but do not

over tighten grille screws (1).

3. Reconnect power to the unit.