QUICK START GUIDE Nugget Ice Machine • ADA, 1 & 3 Class 30608 Rev_B
QUICK START GUIDE u-line.com WELCOME TO U-LINE Congratulations on your U-Line purchase. Your product comes from a company with over five decades of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine use.
QUICK START GUIDE u-line.com This Quick Start Guide covers the basics of installation and general use of your product. CONTENTS Safety and Warning 4 Environmental Requirements 5 Electrical 5 Water Hookup 6 Drain 8 Door Swing 9 Door Adjustments 11 General Installation 13 Integrated Panel Installation 14 Control Operation 15 First Use 18 Ice 18 Cleaning 18 Warranty 20 For more details, see the complete User Guide & Service Manual on u-line.com.
QUICK START GUIDE u-line.com Safety and Warning ! DANGER Please read all instructions before installing, operating, or servicing the appliance. Your product may contain R600a (Isobutane) which is a flammable hydrocarbon. To confirm, check serial tag inside unit. It is safe for regular Use this appliance for its intended purpose only and follow use. Do not use sharp objects to expedite these general precautions with those listed throughout this defrosting.
QUICK START GUIDE u-line.com Environmental Requirements Electrical This model is intended for indoor/interior applications only ! WARNING and is not to be used in installations that are open/ exposed to natural elements. SHOCK HAZARD — Electrical Grounding Required. Never attempt to repair or perform This unit is designed to operate between 50°F (10°C) and maintenance on the unit until the electricity has 100°F (38°C). Higher ambient temperatures may reduce been disconnected.
QUICK START GUIDE u-line.com Water Hookup ! CAUTION PREPARE PLUMBING Do not use any plastic water supply line. The line The water valve uses a standard 1/4" (6.35 mm) is under pressure at all times. Plastic may crack compression fitting. U-Line recommends using accessory or rupture with age and cause damage to your water hook up kit – part # 80-54674-00. The kit includes a home. 10' (3 m) braided flexible water supply line and a brass hose fitting.
QUICK START GUIDE u-line.com 3. Thread water line through back panel hole (with bushing). 3 4. Locate water valve inlet and connect to valve. 4 5. Turn on water supply and check for leaks. 6. Reinstall back panel.
QUICK START GUIDE u-line.com Drain GRAVITY DRAIN Model numbers including “CL” or “NB” do not include a factory installed drain pump. Normal Proper Drain Model numbers including “CP” or “NP” include a factory installed drain pump. With Trap Poor Drainage, Water Will Back Up DRAIN CONNECTION ! CAUTION With Trap and Vent Proper Drain If your U-Line unit did not come with a factory installed drain pump you must use a gravity A gravity drain may be used if: style drain connection.
QUICK START GUIDE u-line.com FACTORY INSTALLED DRAIN PUMP Y-Branch Tailpiece P60 Pump Required If your drain line will run up to a stand pipe, disposal or Air Gap (Optional Hook-Up) spigot assembly, or does not otherwise meet the requirements for a gravity drain, you may have ordered a pre-installed U-Line P60 drain pump. Waste If you need to install a P60 drain pump into your unit, see 6KXW 2ɞ Valve DRAIN PUMP section in the User Manual.
QUICK START GUIDE u-line.com Door Adjustments REVERSING THE DOOR 1. Open door. 1 CLASS AND 3 CLASS DOOR ALIGNMENT AND ADJUSTMENT Align and adjust the door if it is not level or is not sealing 2. Using T-25 Torx bit loosen screw #1 and remove screw properly. If the door is not sealed, the unit may not cool door from unit. Completely remove screw #1 on top properly, or excessive frost or condensation may form in and bottom. #2 on top and bottom hinge. Slide and remove the the interior.
QUICK START GUIDE u-line.com Door Adjustments 6. Tighten top hinge screws and replace hinge cover. ADA COLLECTION TO REVERSE THE DOOR HINGE COVER Hinge cover included with the literature bag is optional. To install hinge cover: 1. Press hinge cover squarely over hinge. Hinge Cover Remove top hinge and door: 1. Hold door to keep it from falling. DOOR ALIGNMENT AND ADJUSTMENT Align and adjust the door if it is not level or is not sealing 2. Remove top hinge from cabinet using a Torx T-25 properly.
QUICK START GUIDE u-line.com Install top hinge and door: 4. Remove three screws from hinge holes on the opposite side. Reinstall into holes where the hinge was 1. Install hinge with longer straight edge aligned to removed. outside edge of cabinet. Do not tighten. Remove bottom hinge: 1. Remove bottom hinge from cabinet using a T-10 TORX screw driver to remove three screws. 2. Lift the door on to the bottom hinge. 3. Align edge of the hinge with the outer edge of the unit. 4.
QUICK START GUIDE u-line.com General Installation INSTALLATION 1. Plug in the power/electrical cord. LEVELING INFORMATION 1. Use a level to 2. Gently push the unit into position. Be careful not to confirm the unit is entangle the cord or water and drain lines, if level. Level should applicable. be placed along top edge and side edge 3. Re-check the leveling, from front to back and side to as shown. side. Make any necessary adjustments.
QUICK START GUIDE u-line.com Integrated Panel Installation It is important to ensure that all drilled holes are INTEGRATED MODELS ONLY splits in the wood when hardwood is installed. 1. Fully open door. 8. Locate 6 of the #6x 1-1/2" (38 mm) screws provided drilled to the correct depth in order to avoid with your unit. 2. Starting at corner, pull gasket away from door. 9. Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws. 3.
QUICK START GUIDE u-line.com Control Operation 1 CLASS CONTROL FUNCTION GUIDE FUNCTION COMMAND NOTES ON/OFF Press Unit will immediately turn ON or OFF. Enable Sabbath Mode Press and release and hold for 5 seconds and release. The oF / oC symbol will flash briefly after 5 seconds. Interior light and display will go dark and remain so until user resets mode - unit continues to operate. Disable Sabbath Mode Press and release.
QUICK START GUIDE u-line.com Control Operation 3 CLASS CONTROL FUNCTION GUIDE FUNCTION COMMAND NOTES ON/OFF Press Unit will immediately turn ON or OFF Adjust ice density See “Ice” section Adjust light color Enable Sabbath Mode and release While holding press and release scroll through lighting options Press and hold for 5 seconds and release to Option Open Door 00 01 02 White Blue White The oF / oC symbol will flash briefly after 5 seconds.
QUICK START GUIDE u-line.com ADA COLLECTION CONTROL FUNCTION GUIDE FUNCTION COMMAND NOTES ON/OFF Press Unit will immediately turn ON or OFF. Adjust ice density See “Ice” Section Enable Sabbath Mode Press and release and hold for 5 seconds and release. The oF / oC symbol will flash briefly after 5 seconds. Interior light and display will go dark and remain so until user resets mode - unit continues to operate. Disable Sabbath Mode Press and release.
QUICK START GUIDE u-line.com First Use Cleaning Initial startup requires no adjustments. See CONTROL This ice machine has an automatic clean alert function. OPERATION section for more details. The control will indicate U-Line recommends discarding the ice produced during the first two to three hours of operation your unit. When to avoid possible dirt or scale that may dislodge CL is displayed, ice production will continue. Depending on water conditions, more frequent from the water line.
QUICK START GUIDE u-line.com 2. ! CAUTION a. 02 will appear in the display b. Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of water Use only SafeCLEAN PlusTM Cleaner. Use of any other cleaner may damage the finish of the 3. evaporator and will void the warranty. Wait until 03 appears in the display a. Using the funnel and cleaning tube, slowly pour 3 /4 of the cleaning solution into the dispenser tube. Air and some water will exit the vent tube. Remove cleaning tube.
U-Line Corporation (U-Line) Limited Warranty One Year Limited Warranty For one year from the date of original purchase, this U-Line product warranty covers all parts and labor to repair or replace any part of the product that proves to be defective in materials or workmanship. For products installed and used for normal residential use, material cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of original purchase.