Quick Start Guide

QUICK START GUIDE
u-line.com
First Use
Initial startup requires no adjustments. See CONTROL
OPERATION section for more details.
U-Line recommends discarding the ice produced
during the first two to three hours of operation
to avoid possible dirt or scale that may dislodge
from the water line.
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
installation, simply press and the unit will immediately
switch on. To turn the unit off, press and release.
Ice
1 CLASS
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately
3
/
4
” x
1
/
2
”.
Ice is produced until the machine senses the bin is full. As
ice slowly melts in the bin, the level of ice drops and ice
production resumes. This ensures a constant supply of
fresh ice is always available.
3 CLASS AND ADA COLLECTION
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately
3
/
4
” x
1
/
2
”.
Ice is produced until the machine senses the bin is full. As
ice slowly melts in the bin, the level of ice drops and ice
production resumes. This ensures a constant supply of
fresh ice is always available.
The factory default ice setting is 0, which produces a firm
and compact ice nugget. U-Line’s exclusive U-Choose™
ice adjustability feature allows you five levels of
adjustment from 0 to -5. At -5 the ice is soft and
chewable.
To adjust the ice density:
1. Hold for 5 seconds - display will flash current ice
setting
2. Adjust using or
3. Confirm setting by pressing
Cleaning
This ice machine has an automatic clean alert function.
The control will indicate
CL in the display, approximately
every six months with normal use, reminding you to clean
your unit. When
CL is displayed, ice production will
continue. Depending on water conditions, more frequent
cleaning may be necessary. Cleaning removes lime scale,
other mineral deposits, and sanitizes the machine. Poor
ice quality and reduced ice output are signs that cleaning
is necessary. If the machine consistently requires more
frequent cleaning, consult a plumber to test the water
quality and recommend appropriate treatment.
Under normal conditions cleaning should be
done when the display shows
CL. You may
initiate a cleaning cycle at any time by pressing
and holding the clean button for 10 seconds.
0 1
will appear in the display indicating the start of
the cleaning process.
You may override
CL in the display without cleaning by
pressing and holding the up, down, & light button for 10
seconds.
ICE will scroll in the display and the cleaning
reminder
(CL) will be reset for another approximate six
month cycle. Failure to clean may reduce the quality and
quantity of ice produced. Once the clean cycle begins, it
can be canceled by pressing three times. Press once
more to start making ice. The clean cycle will
automatically cancel if user fails to activate control at
steps 2, 3b, and 5b within 2 hours.
Required for cleaning:
Hose and funnel – provided with unit
Bucket and cleaning sponge
Clean water
SafeCLEAN Plus™ Cleaner (Part No. 80-55266-00)
– included with unit
Need more cleaner? Visit u-line.com.
18