user guide_and_manual

USER GUIDE

Door Swing 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

3. Locate water

valve in the front

of the unit and

thread water

supply line

through.

NOTICE

Route the water

supply line

through the unit so it does not come into contact

with any internal components other than the

solenoid valve. Normal operation creates some

vibration. A water supply line contacting an

internal component or cabinet wall can cause

excessive noise during operation or damage to

the line.

4. On the back panel,

break away filler feature

in bushing with flat

screwdriver.

5. Thread water line

through back panel hole

(with bushing).

6. Turn on water supply and check for leaks.

7. Reinstall the grille (plinth strip/base fascia) and access

panel (if equipped) along with the back panel.

8. Install retaining clip.

Remove

ZLWKɠDW

screwdrive