User's Manual

U-MEDIA Communications, Inc.
2.2. Getting Started
Connecting the BRC and HCR for First Use
1 Connect the power adapter to HCR and power on HCR
2 Connect the power adapter (with miniUSB connector) to charge BRC and power on BRC. (You should
charge your new BRC when you remove it from the package)
Pairing the BRC and HCR for First Use
3 Pairing Main Menu will pop up on the screen after you turn on BRC. Select Pairing and press Enter,
BRC will spend 60 seconds to search HCR nearby and list MAC addresses found. Select the MAC
en will show up.
Address you want to pair with and Press Enter.
4 After Pairing process finish successfully, Main Scre
Configuring Internet Connection
5 Go to Settings
NETWORK, choose the Network Interface you want to enable
5.1 Network Interface: LAN or WLAN. (If you choose LAN, 5.2 & 5.4 will be grey out)
5 sers to complete
wireless settings
5.3 IP Settings: choose Auto / DHCP or Manual / Static IP
.2 Wireless LAN Setting Wizard: Scan surrounding access points and guide u
WAP-5000 DO NOT COPY 13-4