User's Manual

Manual Input (Hexadecimal): You generate your own WEP Key using hexadecimal

characters (10 characters for 64-bit, 26 characters for 128-bit, 32 characters for 152-bit).

5. Click [OK] to save your settings and return to the previous screen.

6. If you want to use 802.1x authentication with WEP, you will need to configure your 802.1x

settings. Please see section 4.5 for details on configuring 802.1x.

Configuring WPA-PSK

1. Select [WPA-PSK] under [Security Mode].

2. Select [Encryption method]. You can choose between TKIP or AES. Most access points

use TKIP for WPA-PSK.

3. Under [PSK Pass Phrase] enter the same pass phrase used to configure WPA-PSK on

your access point.