User Manual

44
• A host needs to support several applications that might use overlapping ingress ports
such that two port forwarding rules cannot be used because they would potentially be in
conflict.
• To handle incoming connections that use a protocol other than ICMP, TCP, UDP, and
IGMP (also GRE and ESP, when these protocols are enabled by the PPTP and IPSec
ALGs ).
Enable DMZ
Note: Putting a computer in the DMZ may expose that computer to a variety of security risks.
Use of this option is only recommended as a last resort.
DMZ IP Address
Specify the LAN IP address of the LAN computer that you want to have unrestricted Internet
communication. If this computer obtains its address Automatically using DHCP, then you may
want to make a static reservation on the Basic → Network Settings
page so that the IP address
of the DMZ computer does not change.
Non-UDP/TCP/ICMP LAN Sessions
When a LAN application that uses a protocol other than UDP, TCP, or ICMP initiates a session to
the Internet, the router's NAT can track such a session, even though it does not recognize the
protocol. This feature is useful because it enables certain applications (most importantly a
single VPN connection to a remote host) without the need for an ALG.
Note that this feature does not apply to the DMZ host (if one is enabled). The DMZ host always
handles these kinds of sessions.
Enable
Enabling this option (the default setting) enables single VPN connections to a remote host. (But,
for multiple VPN connections, the appropriate VPN ALG must be used.) Disabling this option,
however, only disables VPN if the appropriate VPN ALG is also disabled.
Application Level Gateway (ALG) Configuration
Here you can enable or disable ALGs. Some protocols and applications require special
handling of the IP payload to make them work with network address translation (NAT).
Each ALG provides special handling for a specific protocol or application. A number of ALGs
for common applications are enabled by default.
PPTP
Allows multiple machines on the LAN to connect to their corporate networks using PPTP protocol.
When the PPTP ALG is enabled, LAN computers can establish PPTP VPN connections either with
the same or with different VPN servers. When the PPTP ALG is disabled, the router allows VPN
operation in a restricted way -- LAN computers are typically able to establish VPN tunnels to
different VPN Internet servers but not to the same server. The advantage of disabling the PPTP
ALG is to increase VPN performance. Enabling the PPTP ALG also allows incoming VPN
connections to a LAN side VPN server (refer to Advanced
→
Virtual Server
).
IPSec (VPN)
Allows multiple VPN clients to connect to their corporate networks using IPSec. Some VPN
clients support traversal of IPSec through NAT. This option may interfere with the operation of
such VPN clients. If you are having trouble connecting with your corporate network, try
disabling this option.
Check with the system adminstrator of your corporate network whether your VPN client
supports NAT traversal.
Note that L2TP VPN connections typically use IPSec to secure the connection. To achieve