User Manual

Select the starting and ending times for the change to and from daylight saving time. For

example, suppose for DST Start you select Month="Oct", Week="3rd", Day="Sun" and

Time="2am". This is the same as saying: "Daylight saving starts on the third Sunday of October

at 2:00 AM."

Automatic Time Configuration

Enable NTP Server

Select this option if you want to synchronize the router's clock to a Network Time Server over

the Internet. If you are using schedules or logs, this is the best way to ensure that the

schedules and logs are kept accurate.

Note that, even when NTP Server is enabled, you must still choose a time zone and set the

daylight saving parameters.

NTP Server Used

Select a Network Time Server for synchronization. You can type in the address of a time server

or select one from the list. If you have trouble using one server, select another.

Set the Date and Time Manually

If you do not have the NTP Server option in effect, you can either manually set the time for

your router here, or you can click the

Copy Your Computer's Time Settings

button to copy the time

from the computer you are using. (Make sure that computer's time is set correctly.)

Note: If the router loses power for any reason, it cannot keep its clock running, and will not have the

correct time when it is started again. To maintain correct time for schedules and logs, either you must

enter the correct time after you restart the router, or you must enable the NTP Server option.