User Manual

47
Remote IP Range
Define the ranges of Internet addresses this rule applies to. For a single IP address, enter the
same address in both the Start and End boxes. Up to eight ranges can be entered. The
Enable checkbox allows you to turn on or off specific entries in the list of ranges.
Save/Update
Record the changes you have made into the following list.
Clear
Re-initialize this area of the screen, discarding any changes you have made.
Inbound Filter Rules List
The section lists the current Inbound Filter Rules. An entry can be changed by clicking the Edit
icon or can be deleted by clicking the Delete icon. When you click the Edit icon, the item is
highlighted, and the "Edit Inbound Filter Rule" section is activated for editing.
In addition to the filters listed here, two predefined filters are available wherever inbound filters
can be applied:
Allow All
Permit any WAN user to access the related capability.
Deny All
Prevent all WAN users from accessing the related capability. (LAN users are not affected by
Inbound Filter Rules.)