Manual
4-1: Operating Instructions
CMX-20
4 - Operating Instructions
PREPARATION
Operating instructions presented in this section
apply to both the 120 V and 230 V versions of
the CMX-20. However, photos and illustrations
show only the 120 V version due to space
limitations.
Handle Adjustment
Pull or push on the adjustment lever to adjust the
height of the handles (see
Figure 4-1). Several
adjustments may be needed before a desirable
operating position is found.
Most operators have better control and
experience less fatigue when the handle is in
a lower position, at the operator’s hip line. For each person, there is an ideal
position which ensures the CMX-20 does the work instead of the individual.
Solution and Vacuum Hose Connections
Your CMX-20 is equipped with a 440 male quick connect for the solution hose connection
and a 2” O.D. vacuum hose inlet (see Figure 4-1). The vacuum inlet requires a 2” I.D.
vacuum hose for proper air ow with a truckmounted system.
The vacuum hose must be in good condition to ensure maximum airow.
A solution hose with a 440 female quick connect is also required. If you do not
have a 440 female quick connect, order it from U. S. Products.
Figure 4-1. (1) Pull or Push on
Adjustment Lever;
(2) Location of 440 Male
Quick Connect;
(3) Vacuum Hose Inlet
(120 V Version Shown)
1
2
3