User Manual

22
General Assembly of parts
Controller
1. Remove the controller from the carry case and place on a level and stable surface.
2. Remove the protective covers from the two circular connectors.
3. Connect the 1 m black curly power cable to the controller power socket, ensuring that
the connector is securely fastened and the collar has locked.
Note on circular connectors: The circular connector is a robust, positively locking,
keyed connector. When making the connection the plug will only fit one way, so
rotate the plug until it drops into the socket. The collar is then twisted clockwise until
it ‘locks’. To undo the connector, simply twist the collar in a counter-clockwise
direction until the connector becomes loose.
4. The battery pack is now connected to the power cable by pushing the silver connector
onto the battery plug. Ensure the connector has locked.
5. Remove the flexible visor from the carry bag. If it appears crushed, the following
procedure should enable it to regain some shape.
• Place both hands inside the visor, one from each end. Rotate your hands whilst
applying an outward stretching pull.
6. Fasten the visor to the front of the controller.
• Place the visor onto the screen with the wider end downwards.
• With one hand outside the visor and the other inside the visor, carefully stretch it
so that it fits around the bezel.
• If necessary, twist the visor so that it fits snugly and neatly on the bezel.
7. Do not turn on the power until the rest of the system has been assembled.