User's Manual

37
Office Mode
In office mode, the radar operator has the ability to carry out tasks which are not suitable in
the field, such as data backup, data processing and printing out radar data or report writing.
As the SPRscan controller is running the Windows for Workgroups 3.11 environment, it is
easy to install and run favourite or necessary software such as a word processor, drawing
package etc.
Setting up the controller in office mode:
1. Place the controller on a level surface and, using a support, tilt it slightly to afford a
clear view of the screen.
2. Remove the mains power adapter from the carry bag and connect it to the circular
power socket.
3. Plug the adapter into the mains supply.
4. Remove the black side panel by unscrewing the two plastic headed screws. Allow it to
swing free on the lanyard.
5. Remove the keyboard from its protective pouch in the carry bag.
6. Plug the keyboard into the controller side panel connector marked “KEYBOARD”.
7. Remove the mouse from its protective pouch in the carry bag.
8. Plug the mouse into the controller side panel connector marked “MOUSE “.