Technical data

PD_OpManPS-4_06_us.fm
ELAU AG PacDrive PS-4 / PD-8 page 45
6.2 PacDrive PS-4
Hard-copy for correction
In addition, you can use the tool ECAM-4 version V2.3 or higher for
the calculation. This makes it possible to take almost any possible
combination into account.
Selection table for autotransformers by Block (third-party products)
Table 6-1: Selection table for autotransformers
If no transformer is used, you have to select and used a mains
choke from the following table:
Table 6-2: Selection table for mains chokes
Type
DSP 400/1,5 DSP 400/3 DSP 400/6 DSP 400/9 DSP 400/15
Output current 3 x 1.5 A 3 x 3 A 3 x 6 A 3 x 9 A 3 x 15 A
Order number Article name
Permanent
current
FI 078 80 NKD 10 / 2.93 10 A
FI 078 74 NKD 25 / 1.17 25 A