Technical data

PDM_SicherhMax_us_neu.fm
ELAU AG PacDrive page 9
2.3 Use as Directed
Korrekturausdruck
2.3 Use as Directed
The ELAU components are designed for installation in a machine/
plant or for combination with other components to form a machine/
plant. The components may only be used under the installation and
operating conditions described in this documentation. You must use
the accessories and ancillary parts (components, cables, etc.)
mentioned in the documentation. You must not use any foreign
objects or components that are not explicitly approved by ELAU.
"Use as directed" also means that you
 observe the Operating Manuals and other documentations (see
appendix),
 observe the instructions for inspection and maintenance.
Use other
than directed
The operating conditions at the place where the device is used
must be checked on the basis of the given technical data
(performance information and ambient conditions) and observed.
The device must not be put into operation until it is guaranteed that
the useable machine or the plant in which the motor is installed
meets in its entirety EC directive 98/37/EC (machine directive).
In addition, observe the following norms, directives and regulations:
 DIN EN 60204 Safety of machines:
Electrical equipment of machines.
 DIN EN 292 part 1 and part 2 Safety of machines:
Basics, general design guidelines.
 DIN EN 50178 Equipment of high-voltage plants with electronic
operating means.
 EMC directive 89/336/EEC