Manual

Fan Guard
Installation Guide
For Models 9910APV & 1010APV
For Installing the Fan Guard Kit on the All Purpose Ventilator
US Sunlight Corp. 5625-B Brisa Street, Livermore, CA 94550 1-866-446-0966
www.ussunlight.com
Step 1: Prepare the four metal
clips and locate the four corners
of the All Purpose Ventilator Fan
housing (fig. 1)
Step 4: The prongs on the metal
clips should be facing upwards
(fig. 4)
Step 5: Place the metal fan guard
over the prongs (fig. 5)
Step 2: Slide the metal clips down
in to the corner brackets as shown
(fig. 2)
Step 3: Firmly Press down the
metal clips until secure
(fig. 3)
Step 6: Press the metal fan guard
in place until secure .(fig. 6)
The Fan Guard provides protection from the All Purpose Ventilator fan blade as
well as additional rodent control benefits.
fig. 1 fig. 2 fig. 3
fig. 4 fig. 5 fig. 6