Ultraloq UL3 Fingerprint and Touchscreen Smart Lock User Guide
Operation Video Please watch our easy step by step operation video before attempting to use your Ultraloq UL3 Fingerprint and Touchscreen Smart Lock. www.u-tec.com/support If you have any questions regarding the installation process please contact us at customerservice@u-tec.com Register Your Lock To ensure the best warranty coverage and customer service, please register your product at http://store.u-tec.
Lock Parts Exterior Touchscreen Fingerprint reader Message display screen Backup key hole Restart button Backup Key Hole: Used to insert key to unlock. Restart Button: Used to jump start the lock if activation fail. Fingerprint Reader: Used to press finger and unlocking from outside. Touchscreen: Used to enter code and unlocking from outside. 0-9 Numbers Return to previous Confirm Interior SN Label Reset Button Battery Cover Reset Button: Used to reset the lock to factory default settings.
Lock Operation Clean the fingerprint reader and touchscreen Use a microfiber cloth to wipe across the fingerprint reader surface and the touch screen. Lock Activation Press finger on fingerprint reader or touch lock with back of hand or fingers. Lock will turn off again in 20 seconds if there are no other inputs. Open door from outside with user PIN code 1. Touch lock with back of hand or fingers to activate the lock. 2. Input user PIN code to unlock. 3. Rotate handle and open the door.
Open door from outside with fingerprint 1. Press finger on fingerprint reader to active and unlock. 2. Rotate handle and open the door. Open door from inside 1. Rotate handle and open the door. Replace battery When you activate the lock and see the message “Low battery”, you should replace the batteries. Use three (3) high-quality alkaline AA batteries for replacement. Emergency Key Override Emergency Key Override can be used when the battery is completely dead, or when no valid User Code is known.
Lock Programming Factory Defaults Factory default setting is that any fingerprint or PIN code can open the door. Register Admin and User Admin account must be created first prior to any other programming.Then use the Admin account to add or delete the other accounts. User PIN code User PIN code can be 4 to 8 digit number. User ID number User ID can be 1 to 8 digit number. Limit number of users on lock You can register up to 95 users with fingerprint and PIN code. Basic programming steps 1.
1 Add Admin First Admin account must be created first prior to any other programming.
2 Add User Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Press 1 Welcome Admin code Menu Add user Press Enter user ID Enter user ID Finger or code Press finger or input a PIN code Enter again Press finger or input a PIN code Success -7-
Delete User Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Press 2 Press Enter user ID Enter user ID again -8- 3 Welcome Admin code Menu Delete user Enter user ID Enter again Success
4 Add Admin Activate Lock Press and hold for 3 sec Welcome Admin code Menu Press admin finger or enter admin PIN code Press 7 Press Add admin Finger or code Press finger or input a PIN code Enter again Press finger or input a PIN code Success Note: It is recommended to register several Admin fingerprints and PIN codes.
5 Delete Admin Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Admin code Menu Press 8 Delete admin Press Finger or code Press admin finger or enter admin PIN code - 10 - Welcome Success
Keep Your Records Note: It is recommended to register several Admin fingerprints and PIN codes.
Keep Your Records Note: It is recommended to register several Admin fingerprints and PIN codes.
Note Date / /
Note Date / /
U-tec and Ultraloq brands and products are trademarked and protected under law in the United States. Unauthorized use is prohibited. Ultraloq is sub-brand of U-tec Group Inc. 2015 © U-tec Group Inc. All Rights Reserved.