User's Manual

4
Pairing Instructions
1. This item is Bluetooth earphone, the right and left earbuds
should be paired with each other to get a stereo sound effect.
2. The earbuds will be paired automatically once they are turned
on.In default setting,the right earbud(R) is the main earbud.
During paring,the indicator lights flash red and blue slowly and
alternately.If the earbuds are paired successfully,the indicator lights
flash red once,then turn off.
(Note：With the earbuds off, press and hold the button,the one
earbud will be connected to the cellphone,the one earbud will enter
the pairing state.At this point,if connect your phone to the earbud , it
may cause your phone connect with the one earbud preferentially ,
then cannot use stereo functions .Once enter this state,please
resume the operation according to the following re-pairing
operation instructions.)
Earbuds Re-pairing
1. Please ignore the pairing record of the headset in your
cellphone.
2. Press and hold the buttons of the left and right earbuds for 15
seconds to delete all pairing record.
3. Press and hold the buttons of the left and right earbuds for 2
seconds,they will pair to each other automatically. About 3-5
seconds later, the indicator lights on the earbuds will flash red and
blue alternately then turn off. At this point, the pairing between the
earbuds is successful.
4. After successful pairing, the main earbud (right) flashs red and
blue automatically, and it enters the state of searching Bluetooth
signal.
Bluetooth Connection
1. For the first time,after the two earbuds power on , search the
Bluetooth name of“S2-R”on the cellphone,tap it to connect.Then
the indicator light will not flash any more.
2. Earbuds connecting back (Cellphone should have an automatic
connecting back function)
After the earbuds and the mobile phone are successfully
connected,once beyond the Bluetooth connection range,they will