Li-LV Battery Series USER MANUAL Li-LV LFP Battery Module | USER MANUAL
Content Overview --------------------------------------------------------------------------------------------------------------------------------------------------3 Product specifications ------------------------------------------------------------------------------------------------------------------3 Errors or omissions ------------------------------------------------------------------------------------------------------------------------3 Electronic device:Do not throw away -----------------------------
To secure the full 10-year product warranty, be sure to install the Wattsonic Li-LV battery modules by qualified installers. Warning: Read this entire document before installing or using Wattsonic Li-LV LiFePO4 battery modules. Failure to do so or to follow any of the instructions or warnings in this document can result in electrical shock, serious injury, or death, or can damage Wattsonic Li-LV LiFePO4 battery module, potentially rendering it inoperable.
Important Safety Instructions SAVE THESE IMPORTANT SAFETY INSTRUCTIONS. Wattsonic Li-LV LiFePO4 battery module installation and repair instructions assume knowledge of high voltage electricity and should only be performed by Wattsonic Certified Installers. Wattsonic assumes no liability for injury or property damage due to repairs attempted by unqualified individuals or a failure to properly follow these instructions. These warnings and cautions must be followed when using Wattsonic.
Warning: Wattsonic Li-LV Battery contains components, such as switches and relays, that can produce arcs or sparks. Warning: To protect Wattsonic Li-LV Battery and its components from damage when transporting, handle with care. Do not impact, pull, drag, or step on Wattsonic Li-LV Battery. Do not subject Wattsonic Li-LV Battery to any strong force. To help prevent damage, leave Wattsonic Li-LV Battery in its shipping packaging until it is ready to be installed.
Specifications 5kWh Wall Mounted/Free Stand LiFePO4 Battery Module Total Energy [kWh] 5.0 Useable Energy [kWh] 4.5 Nominal Voltage [V] 51.2 Nominal Capacity [Ah] 100 Operating Voltage Range [V] 40~58.
Standard Packing List Li-LV LFP Battery Battery Backsheet Battery<-->Inverter Battery<-->Inverter Rj45 Communication Cable M6 Expansion Screws COM Resistor Li-LV LFP Battery Module | USER MANUAL 7
Mechanical Installation Single battery installation Minimum 200mm above ground. Please use M6 expansion Step-1, Confirm the exact mounting positionscrews to fix the battery backsheet on the wall of battery backsheet. according to the fixed Step-2, Hanging on the battery module to the mounted battery backsheet. position. Multiple battery installation Backsheet spacing is greater than 20mm. Step-1, Confirm the exact mounting position of battery backsheet.
Electric Connection Top connection interface ① ② ③ ④ ⑤ ⑥ ⑦ Battery<-->Inverter Power Cables(+) Battery<-->Inverter Power Cables( - ) Communication cables(up) Communication cables(down) Battery Reset Button DC Isolator Grounding Point ⑥ ⑦ ① ② ③ ⑤ ④ ⑧ Communication cable Step-3, Cables Connection and COM Resistor ⑨ COM Resistor Then please plug in the COM resistor to the last communication interface, which is open. 1.
Start the Battery Array Step-4, please pull on the DC Isolator ON OFF The indicator light is on, showing green, and the machine is on normally.
System Setting NORMAL OPERATION During normal operation, if Li-LV LFP Battery Module are installed correctly, the inverter and battery will start communication immediately, then begin to process power commands. See the inverter manual for further configuration instructions. Warning: Do not operate Li-LV LFP Battery Module unless all covers are in place. Warning: Do not disconnect anything from or add anything to Li-LV LFP Battery Module.