Tus neeg siv phau ntawv

Li-LV LFP Battery Module | USER MANUAL
Important Safety Instructions
SAVE THESE IMPORTANT SAFETY INSTRUCTIONS. Wattsonic Li-LV LiFePO4 battery
module installation and repair instructions assume knowledge of high voltage
electricity and should only be performed by Wattsonic Certified Installers.
Wattsonic assumes no liability for injury or property damage due to repairs attempted
by unqualified individuals or a failure to properly follow these instructions. These
warnings and cautions must be followed when using Wattsonic.
Warning: Read this entire document before installing or using Wattsonic Li-LV battery.
Failure to do so or to follow any of the instructions or warnings in this document can result
in electrical shock, serious injury, or death, or can damage Wattsonic Battery, potentially
rendering it inoperable.
Warning: A battery can present a risk of electrical shock, fire, or explosion from vented
gases. Observe proper precautions.
Warning: Wattsonic Li-LV Battery installation must be carried out only by Wattsonic
Certified Installers, who have been trained in dealing with high voltage electricity.
Warning: Wattsonic Li-LV battery is heavy and challenging to lift.
Warning: Use Wattsonic Li-LV Battery only as directed.
Warning: Do not use Wattsonic Li-LV Battery if it is defective, appears cracked, broken, or
otherwise damaged, or fails to operate.
Warning: Before beginning the wiring portion of the installation, first power off the
inverter and then open the AC and DC disconnect switches (if applicable for the
installation).
Warning: Do not attempt to open, disassemble, repair, tamper with, or modify Wattsonic
Li-LV Battery. Wattsonic Li-LV Battery is not user serviceable. LiFePO4 battery Cells in
Wattsonic Li-LV Battery are not replaceable. Contact the Wattsonic Authorized Reseller
who sold the Wattsonic Li-LV Battery for any repairs.
Warning: Do not connect Wattsonic Li-LV Battery to alternating current(AC) carrying
conductors. Wattsonic Li-LV Battery must be wired to either an inverter or a DC combiner
panel that is then wired to an inverter. No other wiring configuration may be used.
SYMBOLS IN THIS DOCUMENT
GENERAL INFORMATION
This manual uses the following symbols to highlight important information:
WARNING indicates a hazardous situation which, if notavoided, could result in
injury or death.
CAUTION indicates a hazardous situation which, if notavoided, could result in
damage to the equipment.
NOTE indicates an important step or tip that leads to best results, but is not safety
or damage related.
Warning
Caution
Note
4