Datasheet

TROUBLESHOOTING
Warning! Isolate the mains supply before commencing any work on the unit. Failure to do so could result in
serious injury or fatality.
Problem: System doesn’t Start
Solution:
• Check the mains supply to the unit is switched on.
• Check Enable Link Is Fitted.
• Check the LINE and LOAD wiring connections to the unit and the Load.
• Contact your supplier.
RECOMMENDATION & SAFETY REQUIREMENTS
SUPPORTING DATASHEETS FOR PRODUCTS AND APPLICATIONS
Other documents, which may be appropriate for your applications, are available on request.
CODE IDENTITY DESCRIPTION
X10255 SRA
Safety requirements: Addressing the Low Voltage Directive (LVD) including, Thermal
data/cooling, Live parts warning Earth requirements and Fusing recommendations.
P01.1 COS UAL Conditions of sale.
ORDER DETAILS
When ordering directly, please use the following stock code:- A403156
NOTE:
It is recommended that installation and maintenance of this equipment should be carried out by suitably
qualified personnel, with reference to the current edition of the I.E.E. Wiring Regulations BS7671. The
regulations contain important requirements regarding the safety of electrical equipment.
Not for general waste