Datasheet

FEATURES

• Large triac for inrush protection.

• Three position and off control.

• Single-hole fixing.

• Rugged and compact.

INTRODUCTION

The switchable phase-angle power regulator is a robust and compact unit, ideal for controlling single-phase mains-driven

loads. The standard QLC units are for 230V supply, with a three position and off control switch. The large triac enables the

unit to handle high in-rush currents with ample safety margin on industrial installations.

APPLICATIONS

This unit is suitable for quartz lamps and conventional resistive-heating elements in series or parallel configurations.

Applications include: ovens, moulders, dryers and some inductive loads (e.g. transformers and motors).

INSTALLATION

CONNECTIONS AND DIMENSIONS

QLC

X10206

PHASE ANGLE ELECTRONIC HEAT

SWITCH

UP TO 15A

RoHS Compliant

PAGE 1
PHASE ANGLE ELECTRONIC HEAT SWITCH UP TO 15A QLC X10206 INTRODUCTION The switchable phase-angle power regulator is a robust and compact unit, ideal for controlling single-phase mains-driven loads. The standard QLC units are for 230V supply, with a three position and off control switch. The large triac enables the unit to handle high in-rush currents with ample safety margin on industrial installations.
PAGE 2
INSTALLATION SPECIFICATIONS Triac limiting rms on state current Unit limiting rms on state current Peak single cycle surge @ 10mS Max load at 20ºC ambient (without extra heatsink) Max unit operating temperature 26A 15A 320A 10A min 65ºC Isolation voltage 2 I t limiting value for fusing Mains supply ( within 10%) operating current Unit storage temperature range 2500V rms 2 112A s 230V ac @ 50/60 Hz 200mA -20 to +85ºC FURTHER DIMENSIONS Shaft diameter Bush length 6.
PAGE 3