User's Manual

Installation Guide For UAT ADSL USB Modem

3. Click on “Advanced” tab. and change desired driver parameters from the following

windows:

Click on “OK” and back to the Network window to change the TCP/IP Net work Settings.

Changing the TCP/IP Network Settings

Click on the “Network” icon to display the network status. Highlight “TCP/IP ->ADI USB

ADSL Modem” and click on “Properties”.

Obtain all the TCP/IP setup information from your network administrators in order to

configure the TCP/IP protocol. If DHCP server is not available from the CO side, enter

the IP address and subnet mask. Also enter the DNS and Gateway information when

necessary.