User's Manual

28
7. The Network window will appear.
Click the Adapters tab to verify that
the ITeX ADSL PC NIC has been
found. Click on the Protocols tab and
verify that the ADSL Management
and Monitor Interface is present.
NOTE: To review the Network
window properties at any time, right-
click the Network Neighborhood icon
and select Properties.
NOTE: If no previous network devices
have been installed, then the Network
Neighborhood icon will not be present
on your desktop. To open the Network
window, double-click My Computer
then Control Panel then Network.
8. The Microsoft TCP/IP Properties
window appears. Enter in the IP
Address, Subnet Mask and Default
Gateway supplied by your ADSL
service provider. Click OK.
9. The Network Settings Change window
appears. You must now re-start your
computer for the settings to take effect.
Click Yes.