User's Manual

29
10. You must now set the ADSL configuration. Go to page 27.
NOTE: The service mode type will be one of
the following:
!!ANSI T1.413 Issue 2
!!ITU G.992.2 Annex A (G.lite)
!!ITU G.992.1 Annex A (G.dmt)
WINDOWS NT 4.0
1.
After your PC has rebooted, right-click
on the Mapi Icon, and select the
Configuration option.
2. The Configuration window appears.
This is the Network Protocol and
PVC settings section. Enter in the
VPI, VCI, and Framing values
supplied by your ADSL service
provider.
3. In the Select ADSL Mode section,
select the mode(s) recommended by
your ADSL service provider. Click on
the mode(s) required and then click on
4. The PVC Setup window appears.
Click Yes to restart your PC system
and to allow the new changes to take
effect
SETTING THE ADSL CONFIGURATION FOR
RFC 1483 OR RFC 1577