User's Manual

36
Editing Your Service Connection
Service Connection
1.
To view or edit the ADSL connection service address, right-click the Diagnostic
Tool icon (located on the Taskbar), and select the Configuration option.
2. The PVC Setup (Permanent Virtual Connection) window displays the connection
service address. Click Close to exit window.
3. To edit the connection service address, select and enter the VPI and VCI address in
the field shown and click PVC Setting.
4. To accept a Connection Address that has been changed (restart the PC System),
click Yes.
NOTE: A PC system restart will begin once the connection address change is
accepted.
IP Configuration
1.
This section includes the IP configuration specifics for Windows NT4.0. The NT 4.0
windows are slightly different from those of Windows 95 /98. Other than minor
screen differences, the process for editing the IP address settings is the same for
Windows NT 4.0 and Windows 95/98.
2. At your desktop, double-click My Computer, then double-click Control Panel to
view the contents of the control panel. In the Control Panel window, double-click
the Network icon.
Note: The Network window shortcut is a right-click on the Network
Neighborhood icon on your desktop, and then a left-click on Properties.
3. Select the Protocols tab of the network window. Select TCP/IP Protocol and click
Properties.
4. Select the IP address option and note that the IP Address and Subnet Mask regions
will turn from gray to active .
5. Enter the IP Address (e.g. 192.168.4.39) and Subnet mask (e.g. 255.255.255.0).
6. Enter the Default Gateway in this window, and then enter the Host Name and
Domain.
NOTE: Please refer to your ADSL service provider. To enter the Domain search
(DNS) entries, click Add, then enter the address. Click Add to save the address.
Repeat the process for additional DNS entries. Click OK to update the changes.