Instruction manual

88
Straighten minor surface irregularities, if required, clean of
dirt, grind and paint.
If damage of the body (cab) is considerable, prime, dry and
paint the surface.
During service of the automobile, periodically treat the body
surfaces, especially enclosed spaces, with corrosion-preventive
compounds, as "Mobil", "Tectil" etc.
If required, recovery the body floor coated with bituminous
cement by spreading it by means of a special spray or brush.
If required, clean the seat upholstery, for that make use of
a neutral soap with water (water-and-soap solution), then wipe
dry with a soft cloth. Never make use of fuel for cleaning the
upholstery of leather substitute.
Remove the heater radiator and remove scale and sediment,
if using water as a coolant, before winter and summer seasons.
Scale and sediment are removed by flushing them with a fast
jet of clean water. The direction of the flushing water flow should
be reverse to the direction of the hot water flow. Also, carry out
external washing of the radiator.
Lubricate according to Lubrication Table: locks, hinges and
catches of doors; door check joints; joints of windshield wiper
blade control linkage, bearings of windshield wiper and body
(cab) heater motors.
LUBRICATION OF AUTOMOBILE
Service life and trouble-free operation of the automobile
depend to a great extent on timely and correct lubrication.
The lubricating materials and special fluids are specified in
this Instruction Manual The points on the chassis and engine
subject to lubrication are indicated in Lubrication Table.
If there are no special instructions in the column "Descrip-
tion", the indicated oil or grease sorts are used in all seasons.
If several grease marks with the same periodicity of changing
are indicated in the column, all the marks are interchangeable.
If the grease mark is provided with the note "substitute", and the
the other periodicity of changing is indicated, use preferably the
base grease mark.
In the process of lubrication, adhere to the following rules: