Quick Start Guide

8 97
BASIC FUNCTIONS
SWITCHING ON AND OFF
Press the Power button to turn the speaker on.
Press and hold the Power button to turn the speaker off.
BLUETOOTH PAIRING WITH DEVICE
Press and hold the Power button for the speaker to enter into
Bluetooth pairing mode.
There will be a sound feeback “pairing” from the speaker when
pairing is successful.
Note: The last paired device will be connected to the speaker
automatically if it is available, after the EUPHO E2 Lite is switched on.
TRUE WIRELESS STEREO (TWS) PAIRING BETWEEN TWO EUPHO
E2 Lite SPEAKERS
1. Press and hold both the Volume down button and the
Volume up button together and the speaker will go into TWS
pairing mode.
2. The paired speakers would be paired automatically to each
other if there are in proximity to each other.
IMPORTANT SAFETY INSTRUCTIONS
1. The product (including relevant accessories), DO NOT expose under
direct sunlight over a long period of time.
2. Operating temperature between 0-50℃.
3. Install the product according to the instruction against hazard to
your body due to fall over.
4. Pay attention to the cables between equipments against stumble
hazard.
5. The product is not a toy, please keep it away from Kids.
6. Use only the external power supply provided with the product or the
standard USB ports certified according to IEC60950-1 as Limited
power source.
7. Product with Lithium batteries, please keep far away excessive heat
such as direct sunshine, fire, heatsink or the like.
8. No user replace parts inside the product.
9. Don’t open the enclosure in case of electric shock hazard.
10. Don’t use wet hands to handle the product.
11. Clean the product with a soft, dry cloth only.
12. Unplug the DC power if smoke, abnormal sound, abnormal smell,
excessive heat or fire occur.
13. Any abnormal phenomenon, please inform your local importer or
local after sales service office.
14. Once the product out of service, please handle the waste according
to the local regulations.
IMPORTANT SAFETY INSTRUCTIONS
Additional Warning for Battery (pack)
1. Lithium-ion batteries used in the product may expose fire or
explosion hazards if misuse.
2. Batteries shall not be exposed to excessive heat or fire in case of
explosion.
3. Don’t handle leaking or damaged batteries.
4. Dispose of used batteries according to local regulation correctly.