User manual

29
11. Enter now the DNS adress of your GSM provider. Those informations are
supplied by your GSM network provider.
12. Now enter a name for the connection, e.g.: „GPRS Online“.
9.5 Build up a GPRS connection
• In the future you have this connection as a icon on your desktop. To start
the connection make a double click on it.=
9.6 Hang up a GPRS connection
• The hang up of a existing connection could be realized from the same
GPRS Manager window.
10. First modem settings
The configuration of the modem is done with a terminal software. ConiuGo GmbH re-
commends the use of CommLite®. After sending “AT” the modem should send back
“OK“.
PIN-number
Ask by AT+CPIN? if a PIN-number is already entered, or enter the PIN-number with
AT+CPIN="xxxx“. Don not leave out the quotation marks!
Signal quality
Check the signal quality by AT+CSQ. With this command the physical signal quality
is tested. It should be higher than 10, otherwise a data transmission can be unstable
despite of a successfully booked in modem.
Status question
By AT+CREG and AT+COPS? the registration status and the provider name are
shown by the device.