User's Manual

Ubee Interactive — www.ubeeinteractive.com
4 Ubee DVW325 – Safety and Installation Product Insert v1.0
2. Connect one end of the supplied Ethernet
cable to one of the ETHERNET ports
(ETH1 to ETH4) on the device. Connect
the other end to the ETHERNET port on a
PC. Note: Category 5e or Category 6
Ethernet cables with RJ45 connectors must
be used when connecting Ethernet devices
to the LAN ports. This ensures Gigabit
Ethernet speeds (unless the computer
does not support it).
3. Connect one end of an RJ11 phone cable
to one of the TEL ports on the device (a
port that has been provisioned for voice
service as specified by the service
provider). Connect the other end to the
phone port of the telephone. Note: If voice
service is not provisioned through the
service provider, telephone service is not
available.
4. Connect the power adapter to the POWER
port on the device. Plug the other end of
the power adapter into the AC wall outlet.
Important: Use only the power adapter
that is shipped with the device.