User's Manual

Ubee Interactive — www.ubeeinteractive.com
5 Ubee DVW325 – Safety and Installation Product Insert v1.0
Wall-Mount Installation
You can mount the device on a wall using the 2
mounting brackets on the bottom of the device.
We recommend that you use two round or pan
head screws.
1. Install two screws horizontally apart on a
wall using the measurement shown to the
right. The screws should protrude from the
wall so that you can fit the device between
the head of the screw and the wall. If you
install the screws in drywall, use hollow
wall anchors to ensure that the unit does
not pull away from the wall due to
prolonged strain from the cable and power
connectors.
2. Remove the device from the product
package.
3. Mount the device on the wall.
4. Refer to the following figure.
The Distance of the Pothook (Horizontal)
The Screw’s Size (mm)
A
6.65+/-0.35
B
1.9+/-0.15
C
19.0+/1.20
140mm (5.5 inches)
A
B
C