User's Manual

Ubee Interactive — www.ubeeinteractive.com
5 Ubee DVW326B – Safety and Installation Product Insert
Wall-Mount Installation
You can mount the device on a wall using the 2
mounting brackets on the backside of the device.
We recommend that you use two round or pan
head screws.
1. Install two screws horizontally apart on a wall
using the measurement shown to the right.
The screws should protrude from the wall so
that you can fit the device between the head
of the screw and the wall. If you install the
screws in drywall, use hollow wall anchors to
ensure that the unit does not pull away from
the wall due to prolonged strain from the
coaxial and power cables.
2. Remove the device from the product package.
3. Mount the device on the wall. Refer to the
following figure.
The Distance of the Pothook (Horizontal)
The Screw’s Size (mm)
A
6.65+/-0.35
B
1.9+/-0.15
C
19.0+/1.20
140mm (5.5 inches)
A
B
C